This year Cricut EU have again challenged some bloggers to create a Halloween project using our Cricut machines. Last year I won the contest with my Halloween Hallway, so of course I was happy to take part again and create something new for Halloween!
I decided to spookify (totally a word, right?!) our dining room…
Cricut sent me some Window Cling, Vinyl, and Iron-On Vinyl, and I had so much fun using them. The kids were super impressed with the room, though of course they are now really excited about Halloween and I had to explain it’s still 2 weeks away!
The first thing I wanted to use was the Window Cling material, as I’ve never used that before. When I opened up a tab for Cricut Design Space the landing page showed lots of spooky projects, so I scrolled down to get some ideas. Here are some of them:
I was immediately drawn to this twirly spider web window cling design:
I clicked ‘customise’ rather than ‘make it now’, so that I could check the size and colours. I decided to leave the size as it was, and I just changed the purple spider to black (by clicking on the spider image in the layer panel, then clicking on the new colour) as I didn’t have any purple:
I cut the image from black & orange window cling material and weeded out all the bits I didn’t need:
Now this is when I had some trouble. I could not figure out how to stick the twirly spider web onto the window without getting into a big mess. I tried with 2 different types of transfer tape (having to pop into work to pick up a roll which I’d left there too) and neither worked – the tape seemed to be too sticky and the window cling material would not stay on the glass. It kept resulting in a tangled mess like this:
After a few frustrated words (!) I went back to look at the ‘Spider Web Window Cling’ instructions from the landing page, and I discovered it sent you to look at THESE INSTRUCTIONS for window cling. I found out I should not be using transfer tape at all, but instead I should be reversing the image before cutting it, and using the backing of the cling material to help transfer it to the window. Now I felt rather silly – I’m always telling hubby off for not reading instructions!
So I went back and cut it again, making sure to tick the box to mirror the image:
It worked much better this time, though it was still fiddly and I had to go very slowly. The spiders were a lot easier as I just peeled them straight off the backing and applied them by hand:
I decided to stick to some bold, simpler shapes for the rest of the window! I used the pumpkins from #M14BC40 and bats, a cat, and a spider from #M14BC38, both called Halloween Window Cling (by Lia Griffith), and a Spider Web Silhouette #M3D1D4e (from the Creepy Critters Cartridge):
They were a lot easier to apply to the window!
Next I wanted a dramatic tablecloth. I bought a big, cheap piece of black material, and looked for some images to cut from white and silver glitter iron-on vinyls. I chose some ghosts (#M3D1D70) and stars (#M4520B) to cut from white, and some spiders (#M46A3F) and the same stars to cut from silver glitter.
To make sure I fitted as much as possible onto one 12 x 12 mat, I set the canvas (click ‘set canvas’ on the left menu, and choose ‘basic canvas’ – it will automatically be a 12 x 12″ square), then rotated and enlarged my shapes to fill up the canvas. Once it was full I selected them all by dragging a box over them, and clicked on ‘attach’ to join them all together. If you don’t do that it will try to separate some of them onto different mats because of their automatic orientation. Here’s what my attached set looks like:
I cut these out then arranged the spiders and stars in the same way. Once the shapes were all cut and weeded, I placed them all over the tablecloth to work out where they would go – I didn’t worry about them being perfectly spaced, I just wanted pattern around the edge as I would have a centerpiece or maybe a buffet of food in the middle:
I put a tea-towel under the tablecloth and another on top of each shape one at a time, and went round ironing them all down until the tablecloth was finished:
Finally I created the centerpiece. I found these candles on the Design Space landing page:
So I cut the graveyard one (Pumpkin Carvings #8 – code #M43515) from black vinyl to stick on a candle. Then I found these treat boxes (the Coffin Box is #M3EBCC and the Spider Web Box is #M450EE):
And I put them together to place inside a plastic pumpkin treat bucket that belongs to my kids. The spider web box was difficult to put together, but luckily I found THIS TUTORIAL to guide me through it!
I also found another candle, and a lacy-effect scarf which I draped around the other items (and scattered some plastic spiders on top):
I’ll also point out I’m using flame-less LED candles on top of the candles, rather than actually lighting them – after hearing how Claudia Winkleman’s daughter was horribly burned because of her witch costume I will always avoid flames when the kids will be around.
Now I’m happy with our spooky Halloween dining room:
The table just needs some treats and snack on it when the day finally arrives!
What do you think, spooky enough? I think the candle with the vinyl graveyard on is my favourite bit, and I’ll be able to easily swap it for a new design after Halloween!
If you need any more Cricut Explore Halloween inspiration check out this amazing Haunted House by Cosmic Strawberry, this Toilet Monster by Mum In The Madhouse, or these Table Decorations at Blue Bear Wood – the Cake Stand Tutorial on her craft blog Zing Zing Tree is particularly cool!
I hope you all have a great week,
DISCLOSURE: Cricut have provided me with a Cricut Explore Machine, some materials including vinyl and window cling, and access to the Image Library, to help me write this post. However ALL opinions in this post are my own and not governed or controlled by Cricut in any way. I’m also entering this into a Cricut bloggers Halloween contest.